Free delivery across Europe on orders over €60
Wall racks, floor stands, work stands and accessories in one place
Delivery in 5-7 days after a 24-48 hour handling time
Tracking number emailed as soon as your order ships

Save €30

Toilet Seat and Bidet | Bidet Seats | Bidet Toilet Seat

Toilet Seat and Bidet

€99 €129 Save €30

Round Or Elongated
No Socket Needed
Replaces Your Seat

Price: €99 €129

Delivery time: 5-7 days after a 24-48 hour handling time
Free delivery across Europe on orders €60+, otherwise a flat €22
Pay by card or PayPal, handled by the payment provider
14 days to change your mind, plus your statutory rights

Product specifications

Type	Non electric bidet toilet seat, replaces the existing seat
Shapes	Round and elongated, same price
Power	None. Cold water only, no electricity required
Compatible toilet seat sizes	Section A 300 mm, Section B 370 mm, Section C 200 mm, per the supplier fitment diagram
Applicable toilet bowls	Vertical tank, convex tank, inserted tank and concave tank
Product dimensions	Not published by the supplier. The figures above are FITMENT, not the product's own size.
Material	Not stated on the listing

Shipping & returns

Tracked delivery anywhere in Europe. It is free on orders of €60 or more, and a flat €22 below that. Allow 5 to 7 days, after a 24 to 48 hour handling time.

Under the Consumer Rights Act 2022 you have 14 days from delivery to cancel for any reason, and a further 14 days to send it back in resaleable condition. We refund the price you paid, including standard delivery. You cover the cost of returning it unless the item is faulty.

If it arrives faulty, damaged or not as described, we put it right at no cost to you under the Consumer Rights Act 2022 and the EU Sale of Goods Directive 2019/771, return postage included.

Shipping details · Refunds and returns

Looking after it

Clean it as you clean the toilet, and keep bleach and thick cleaners off the plastic. Lift the seat and wipe around the nozzle occasionally, because that is where limescale collects in a hard water area.

Round Or ElongatedTwo shapes, same price, pick the one that fits

No Socket NeededRuns on mains water pressure alone

Replaces Your SeatThe old seat comes off, this goes on

About this product

A bidet seat that replaces the seat, not the toilet.

Round or elongated, both at the same price. Non electric, so no socket is needed.

This one replaces your toilet seat rather than sitting under it.

The bidet function is built into the seat, so there is no separate panel and nothing extra visible at the back.

It is non electric. It runs on the cold supply that already fills your cistern, so there is no socket, no plug and nothing to charge.

Two shapes: round and elongated. Same price either way. Measure your pan before you order, because that is the one thing that decides which you need.

Fitting is a seat off, seat on job, plus the same in-line T-valve used by our sprayers.

There are two ways to put a bidet on an existing toilet without electricity. One is a slim attachment that slides under the seat you already have. The other is this: a seat that has the bidet built into it, so the old seat comes off and this goes on in its place.

The practical difference is what you see. An under seat attachment leaves a visible panel at the back and a small control dial off to one side. A bidet seat looks like a toilet seat, because it is one.

It is non electric, which is worth being clear about. There is no warm water, no heated seat and no air drying, because all of those need a socket beside the toilet and most European bathrooms do not have one. What you get is a clean rinse from the cold feed that already fills your cistern.

Shape is the only real decision. Round and elongated cost the same here, and getting it wrong means a seat that overhangs or leaves a gap. Measure your pan from the seat bolts to the front rim before you order: round is typically around 43 cm and elongated around 47 to 48 cm, but measure rather than assume, because pan shapes vary more than the two names suggest.

The supplier publishes a fitment diagram rather than product dimensions, giving section A at 300 mm, B at 370 mm and C at 200 mm. Those are the toilet cover parameters the seat is designed against, and they are not the shipping size of the product. We have recorded them exactly as that rather than presenting them as dimensions, because they are not the same thing.

One thing this port fixes that the old listing got wrong: the live store used a single stock code for both shapes, which meant the warehouse could not tell a round order from an elongated one. Each shape now carries its own code, so the right seat gets picked.

Still deciding?

Not sure yet? That is fine.

You can change your mind. Under the Consumer Contracts Regulations 2013 you have 14 days from delivery to cancel for any reason, and a further 14 days to send it back in resaleable condition. We refund the price you paid, including standard delivery.

If it turns up faulty, damaged or not as described, that is on us. The Consumer Rights Act 2015 covers you, we pay the return postage, and you can have a repair, a replacement or your money back. Read the full detail on our refunds and returns page, or ask us anything before you order.

Returns and refunds Ask a question

Got questions?

Frequently Asked Questions

Does this replace my toilet seat?

Yes. The old seat comes off and this goes on in its place, with the bidet built into it.

How is it different from the under seat attachment?

The attachment slides under the seat you already have and leaves a visible panel at the back. This is the seat, so there is nothing extra to see.

Which shape do I need, round or elongated?

Measure your pan from the seat bolts to the front rim. Round is typically around 43 cm and elongated around 47 to 48 cm, but measure rather than assume.

Do the two shapes cost the same?

Yes, both are the same price here.

Does it need electricity?

No. There is no socket, no plug and nothing to charge. It runs on mains water pressure.

Is the water warm?

No, it is cold. It comes from the same feed that fills your cistern. Warm water needs a powered bidet seat and a socket.

Does it have a heated seat or a dryer?

No. Both of those need electricity, which this does not use.

Do I need a plumber?

No. It uses the same in-line T-valve as our hand held sprayers, fitted with the isolator closed.

How long does fitting take?

Allow half an hour. Most of that is taking the old seat off and lining this one up.

What size toilet does it fit?

The supplier gives a fitment diagram: section A 300 mm, B 370 mm, C 200 mm. Those are the cover parameters it is designed against.

Are those the dimensions of the product?

No, and it matters. They are fitment figures for the toilet, not the shipping size of the seat. The supplier does not publish the product's own dimensions.

What bowl types does it suit?

Vertical tank, convex tank, inserted tank and concave tank, per the supplier diagram.

What is it made of?

The listing does not state a material, so we have not printed one.

Can I adjust the water pressure?

Yes, with the control on the seat. Start low and work up.

Will it fit a square or unusual pan?

Standard round and elongated pans are fine. An unusual shape is worth measuring against the fitment figures first.

Can I take it with me if I move?

Yes. It unbolts like any toilet seat and the T-valve comes off the supply.

Is it soft close?

The listing does not state a soft close hinge, so we are not claiming one.

How do I clean it?

As you clean the toilet. Keep bleach and thick cleaners off the plastic, and wipe around the nozzle now and then.

Will limescale be a problem?

In a hard water area it collects around the nozzle like any other outlet. A wipe with a descaler on a cloth clears it.

Is it hygienic?

The nozzle sits out of the way when not in use. Clean around it as part of normal toilet cleaning. We make no bacterial claims.

Can children use it?

Yes, with the pressure set low.

Is it suitable after surgery or during pregnancy?

People buy it for that, because it removes reaching and twisting. It is a washing fitting and it treats no condition.

Does it work with low water pressure?

Yes, the spray is simply gentler. It cannot add pressure the mains does not supply.

What if my cistern is concealed?

You need to reach the supply line and the isolator, so check behind the panel before ordering.

Why did the old listing have one code for both shapes?

It was a defect on the live site: one stock code covered round and elongated, so the warehouse could not tell which had been ordered. Each shape now has its own code.

Will I definitely get the shape I ordered?

Yes. That is exactly what splitting the codes fixes.

Does it come with fittings?

It comes with what is needed to replace a standard seat and connect to the cistern supply. Contact us if anything is missing on arrival.

Is it better than a hand held sprayer?

Different. A sprayer you aim yourself and it costs less. This is hands free and looks like part of the toilet.

Does it come with a guarantee?

No specific product guarantee is offered on this item. Your statutory rights under EU consumer law apply.

Can I return it if I order the wrong shape?

Yes, the 14 day EU right to change your mind applies in full. Measuring first saves the trouble.

The complete guide

Buying Guide

6 min read Bidet Co Europe

There are two ways to add a bidet to a toilet without running power to it. One is a slim attachment that slides under the seat you already have. This is the other: a seat with the bidet built in, so the old one comes off and this goes on.

What you see afterwards

That is the real difference between the two.

An under seat attachment leaves a visible panel at the back of the pan and a control dial off to one side. A bidet seat looks like a toilet seat, because it is one.

Non electric, and what that rules out

No warm water. No heated seat. No air drying.

All three of those need a socket beside the toilet, and most European bathrooms simply do not have one. What this gives you is a clean rinse from the cold feed that already fills your cistern, with nothing to plug in and nothing to charge.

If warm water is the thing you actually want, you need a powered bidet seat and an electrician before you need us.

Shape is a measurement, not a preference

Round and elongated cost the same here, so there is no money in the decision. There is a fit though, and getting it wrong leaves a seat that overhangs the pan or stops short of it.

Measure from the seat bolts to the front rim. Round is typically around 43 cm and elongated around 47 to 48 cm. Measure anyway, because pan shapes vary more than two names suggest.

About those numbers in the specification

The supplier publishes a fitment diagram rather than product dimensions: section A at 300 mm, section B at 370 mm, section C at 200 mm.

Those are the toilet cover parameters the seat is designed against. They are not the size of the product in the box, and we have recorded them as fitment rather than dressing them up as dimensions. The supplier does not publish the product's own size, so neither do we.

One thing this page fixes

The listing this replaces used a single stock code for both shapes.

That meant the warehouse received an order for a bidet seat with no way of telling whether you wanted round or elongated. Each shape now carries its own code, so the right seat gets picked and sent.

Browse the shop